Automatic Panel Saw (Heavy Duty Rear Feeding)

Super heavy duty rear loading panel saw.

Maximum cutting thickness can be up to 120mm.

Rear feeding machine with the powered roller.

Equipped with powered roller lift.

Pneumatic rapodly change of main saw blade device.

The blade can control the lift height according to thickness of panel.

The press beam can control the lift height according to thickness of panel.

Imported high strength aluminum alloy saw car.

Saw car is drove by servo motor.

Main motor increase to 22KW.

Automatic Panel Saw HP330D(Heavy Duty Rear Feeding)Parameter
Model	HP330D
Max.cutting length	3280mm
Max.cutting width	3280mm
Max.height of blade	100(120)mmIntelligent elevator
Main saw blade	400×4.4×75×72T×140 可选450×4.4×75×72T×140
Scoring saw blade	160×4.4/5.4×45×24T
Forward speed of saw carriage	5-100m/min
Backward speed of saw carriage	0-100m/min
Forward speed of mechanical hand	0-100m/min
Backward speed of mechanical hand	0-100m/min
Side pressure device	Pneumatic two-side press wheel
Motor power of main saw shaft	22kw
Motor power of scoring saw shaft	2.2kw
Saw car servo motor	1.5kw
Feed shaft motor	1.5kw
Voltage	380V/50Hz
Working table's height	950mm
Quantity of mechanical hand	10pcs
Air floating table	3pcs
High pressure blower of air floating table	2.2kw
Air compression	6bar
Air capacity	150L/min
Min.speed of dust collection	26m/sec
Negative pressure(at least)	1200pa
Air capacity for dust collection	4400m³/h
Diameter of dust collecting holes	200×2pcs/100×2pcs
Dimension of rear feeding platform	2500×1300×600mm
Packing size	5400×1420×2200mm 4600×920×1000mm 2600×1350×800mm
Floor area	8680×5400×1910mm
Weigth	7000kg
Minimum panel size	10mm×60mm
Total power	30.8kw