-
ContactThe company mainly develops technologies in intense pulsed light, Laser, RF, Vacuum cavitation, and Ultrasonic.
-
ContactThe company mainly develops technologies in intense pulsed light, Laser, RF, Vacuum cavitation, and Ultrasonic.
Language
English
HD686J
Automatic high speed edge banding machine (Narrow Edge Banding Machine)
Core Highlight
- Special pre-milling mechanism designed for narrow end heads of workpieces, capable of milling end heads with a width of ≥40mm.
- Narrow edge end head auxiliary feeding/side pressure device: specifically designed for narrow board edge banding, facilitating feeding, ensuring safety and stability, and improving efficiency.
- Board heating unit.
- Gluing System 1: Upper gluing system + rapid adhesive melting device, with reserved PUR interface.
- Gluing System 2: Lower EVA gluing system.
- Five-wheel pressing: 4 steel wheels + steel wheel glue scraping device + 1 silicone wheel mode, providing more adherence during pressing, and quickly removing adhesive stuck on the pressing wheels
- Conveyor reducer adopts high-efficiency hardened gear reducer, providing strong and powerful performance.
- Two sets of pneumatic edge avoidance scrapers.
- Equipped with flexible flat scraping, cleaning agent device, and release agent device.
Technical Data
|
Overall dimensions |
About 9200x900x1700mm |
|
Total Power |
About26kw |
|
Lifting |
Electric lifting |
|
Feed speed |
16m-20m-23m/min |
|
Edge thickness |
0.4-3mm |
|
Sheet thickness |
10-60mm |
|
Min processing size for short edges |
120mm*40mm（Narrow board tracking speed） |
|
Min processing size for long edges |
300*40mm（40mm end heads can be pre-milled)(The long edges of the workpiece can turn on corner rounding） |
|
Working air pressure |
0.6Mpa |
Description
|
Control System 1 - Display of current and voltage values 2 - Intelligent IO monitoring 3 - Inverter error code display 4 - Automatic edge banding counter 5 - Intelligent inverter monitoring 6 - User-friendly interface |
|
|
Narrow Board End Head Auxiliary Feeding Specially designed for edge banding on narrow board end heads, with feeding that does not deviate, making feeding convenient, safe, and improving efficiency. |
|
|
Narrow Board Automatic Side Pressure Device Specially designed for edge banding on the long sides of narrow boards, ensuring non-deviation in feeding, convenient and safe feeding. |
|
|
Edge Banding Auxiliary Support Wheels They do not damage the surface of the board, ensuring stable operation of narrow boards on the conveyor belt and providing more stable edge banding.
|
|
|
Pre-Milling Through the milling mechanism, various defects on the processed surface can be removed, ensuring the edge banding achieves the best possible condition. |
|
|
Release Agent Device It acts to separate and solves the problem of hot melt adhesive contaminating the board surface after gluing. |
|
|
Lower EVA gluing system The adhesive amount control is reasonable, with good thermal conductivity, stable operation, uniform coating, stronger adhesion, and a more perfect edge sealing effect. |
|
|
Pressing and Scraping The compression force is strong, ensuring better adherence of the edge sealing tape. It removes excess hot melt adhesive from the workpiece, resulting in smaller glue lines and a more perfect edge sealing effect.
|
|
|
End cutting Quickly cutting the front and rear edge sealing tapes, with two saw blades aligned front and rear, achieving high precision and efficiency.
|
|
|
Rough trimming+Fine trimming The excessive use of edge banding on both upper and lower sides facilitates rapid leveling, resulting in a more perfect edge finishing effect. Ensuring that the upper and lower edges of the edge sealing tape are flush and smooth with the upper and lower surfaces of the wood board. |
|
|
Corner rounding The corner rounding (chamfering) makes the four corners of the panel round and beautiful.
|
|
|
Different-shaped panels can be trimmed to fit
|
|
|
Scraping Remove the knife marks left by the trimming knife and refine the rounded corners (R) further. |
|
|
Cleaning Agent Device Dilutes residual hot melt adhesive, making it easier to clean. |
|
|
Buffing Remove excess glue residue to make the edge sealing tape smoother and cleaner. |
|
|
Deceleration motor 4kw power, stable operation. |
|
|
Rubber coated supporting wheel The front and rear auxiliary supporting wheels are equipped with rubber coated supporting wheels to prevent the plate from knocking.
|
|
Related Products
Intelligent Laser Edge Banding Machine
CNC BORING MACHINE(Single Drilling Unit Six-Sided Drill)
Have Questions? Talk to Our Experts!
Quick Links
Contact Information
Factory 1: Lianfu 1st Road, Fu'an Industrial Zone, Leliu Town, Shunde District, Foshan City, Guangdong
Factory 2: Weiqi Road, Xiaoban Town, Tianmen City, Hubei
hold@fshold.com
+86-18029386958
Leave a Message
For more information, please leave your message below.
Email：
WhatsApp：
在线客服添加返回顶部
右侧在线客服样式 1,2,3 1
图片alt标题设置： Guangdong HOLD CNC Equipment Co., Ltd.
表单验证提示文本： Content cannot be empty!
循环体没有内容时： Sorry,no matching items were found.
CSS / JS 文件放置地